Click To Call(656) 254-5347Click To Get A Free Estimate
Two cars parked beside a freshly sealed paver driveway and garage door in a quiet Oldsmar street

Tire marks and oil spots, handled before sealing

Driveway Paver Sealing in Oldsmar, FL

Call (656) 254-5347 for a free driveway paver sealing estimate in Oldsmar, FL, with a reply in 1 business day.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5347

Do you seal paver driveways in Oldsmar, and how soon will I hear back?

Yes, a local contractor handles paver driveways across Oldsmar, and your request gets an answer within 1 business day, usually much sooner. The estimate is free, and saying no costs nothing. To skip the form, call (656) 254-5347.

A driveway is the part of the house that gets looked at every day. Tires leave dark lanes, oil drips collect under the cars and the apron in front of the garage fades from the sun. A clean, sealed driveway gets the color back, and the next spill wipes up instead of soaking in. Say where the worst marks are when you send the short estimate form.

Call (656) 254-5347

What is different about sealing a driveway instead of a patio?

A driveway carries weight and a patio does not. Cars press on the pavers, tires twist at the apron and oil lands on the surface. Unilock says sealing is key to keeping oil, gasoline and other fluids from penetrating the pavers, and notes that heavy traffic may call for resealing sooner than every three to five years. To talk about your parking pattern, call (656) 254-5347.

That is also why the washing is stronger on a driveway than anywhere else. One Tampa Bay company lists 3,000 to 4,000 PSI for driveway pavers, compared with 500 to 1,000 PSI for pool decks. The spray angle still stays low, at no more than 30 degrees per Unilock, so the sand stays in the joints. To ask how the wash is handled, send the short estimate form.

Contractor with a pump sprayer working along the garage apron of a paver driveway

How are oil stains and tire marks handled before the sealer goes on?

Stains are treated first, because a coat of sealer over a stain does not hide it. Lurvey's says poultice-style products draw set-in oil out as they dry and that older stains may need more than one treatment. A general cleaner on soaked-in oil can leave a dark mark. To point out the spots on your driveway, call (656) 254-5347.

For a new spill, speed helps. Belgard says to use granular absorbent and soak the oil up without rubbing, since rubbing pushes it deeper. Unilock suggests kitty litter, then soap and water or a driveway paver cleaner, and warns against wire brushes whose metal specks rust. Mention any leaking vehicle when you send the short estimate form.

Pricing

What does driveway paver sealing cost in Oldsmar?

One Tampa Bay company publishes a flat $199 to wash a two car paver driveway and $299 for a driveway with a patio. It also publishes $1.50 to $2.50 per square foot for Oldsmar to wash, re-sand and seal. The table shows both for common driveway sizes, with the wash-only column from the flat rates. To turn the figures into a price for yours, send the short estimate form.

Repairs, stripping and heavy stains raise the number, and a wide apron or a circular drive adds square feet quickly. A contractor should measure, not guess. The paver cleaning guide covers wash-only jobs in more detail. To ask for a measured price, call (656) 254-5347.

DrivewaySize exampleWash onlyWash, sand and seal
Two car, paver500 sq ft$199$750 to $1,250
Two car plus patio750 sq ft$299$1,125 to $1,875
Wide three car900 sq ftPriced on site$1,350 to $2,250
Circular or double drive1,200 sq ftPriced on site$1,800 to $3,000

Wash-only prices are the flat rates one Tampa Bay company publishes for a two car paver driveway and a driveway with a patio. Sealing prices use the $1.50 to $2.50 per square foot the same company publishes for Oldsmar. Sizes are examples.

Get a Free Estimate

How long before cars can go back on a sealed driveway?

Plan on a day for feet and two days for cars. One Tampa Bay company lists 24 hours before walking and 48 before vehicles. Unilock says to wait for full cure before driving and to allow up to 48 hours of dry weather. Park on the street or at a neighbor's for the stretch, and tell visitors. To plan around your schedule, call (656) 254-5347.

Sprinklers are the hidden risk on a driveway, because the heads often sit along the apron. Unilock says to switch them off after sealing, since water can leave marks and get trapped under the coat. Check the timer before the day of the job, and mention it when you send the short estimate form.

How it works

How does the driveway sealing process work in Oldsmar?

The driveway sealing process runs in five steps, from a walk of the apron to a short parking ban. Each step sets up the next one. To get on a schedule, call (656) 254-5347.

1. Walk the apron to the garage

The contractor traces the oil drips, tire marks, sunken strips and the places where the sprinkler hits the edge. Notes go on a sketch so the written price matches what was seen.

2. Treat oil and rust first

Oil spots get a degreaser or poultice product, and orange sprinkler stains get their own treatment. Lurvey's says sealing over a stain does not hide it and can make it harder to fix later.

3. Wash the whole surface

A rotary cleaner works across the driveway in even passes. Washy Bear lists 3,000 to 4,000 PSI for driveway pavers, and Unilock still asks for a spray angle of no more than 30 degrees.

4. Refill the joints

Polymeric sand is swept in after the driveway dries and misted to set. Belgard calls joints the most vulnerable part of an installation, which is why this step is never skipped.

5. Seal, then block off the driveway

The sealer goes on in thin, even coats, and cones or tape keep cars off. Vehicles wait about 48 hours and feet about 24, which is the schedule one Tampa Bay company lists.

How often does a daily-parked driveway need a fresh coat?

Every three to five years is the standard, per Unilock and Belgard, and a busy driveway leans toward three. Belgard adds that sealer should go on no more than once every three years with at most two applications, because extra layers can discolor. Signs of wear are patchy sheen, dark lanes and water that sinks in. To have a driveway checked, call (656) 254-5347.

Contractor showing a homeowner the fresh joint sand on the apron of a paver driveway

Does the flat ground in Oldsmar change driveway sealing?

It does, in two ways. The city rests on a plateau that never climbs above 20 feet over sea level, per Wikipedia, so driveways often have little slope and water lingers after storms. Unilock says sealing is not a fix for drainage or subbase problems, which means a puddle spot gets noted before sealer goes on. To point out your puddle spot, send the short estimate form.

Standing water also carries rust. UF/IFAS says most Florida well water is high in iron and leaves orange streaks wherever it touches, and a driveway beside a lawn sprinkler is a typical place. Aiming the heads away from the pavers is cheaper than treating the stain again and again. To ask how the stripe is handled, call (656) 254-5347.

Can I seal part of the driveway or only the front?

Yes, but the color will not match the untouched part, and the seam shows. Ask for the driveway priced as one job and as sections, and compare. A contractor can often plan the break at a control line or a change in pattern. To ask about phasing, call (656) 254-5347.

What should I ask a driveway sealing contractor in Oldsmar?

Ask for the estimate in writing, with the square footage, the product name, the number of coats and the gallon count. Unilock gives 80 to 120 square feet per gallon for solvent-based sealer and 100 to 150 for water-based, so a 600 square foot driveway should land near four to seven gallons of one coat. A number far outside that range is worth a question. To ask for a written estimate, call (656) 254-5347.

Then ask about the extras. Repairs to sunken pavers, oil treatment, stripping an old coat and the stay-off dates should each have a line. A test patch near the garage shows the finish before the full driveway is coated. To request all of that in one visit, send the short estimate form.

How do afternoon storms change a driveway sealing date in Oldsmar?

Nearly two thirds of the year's rain in Pinellas County falls from June through September, with almost daily afternoon thundershowers, per Wikipedia. Unilock asks for clear skies for 24 to 48 hours around the job, so summer dates move often. Mornings are the safer start, and a good contractor will say plainly when the forecast is wrong for sealing. To ask about dates, call (656) 254-5347.

One Tampa Bay company says most jobs finish in one to two days depending on weather and drying. Shade from oaks and a neighbor's house slows drying on part of a driveway, so one end may be ready before the other. Ask who decides when the weather is good enough when you send the short estimate form.

Photos

What do sealed paver driveways look like in Oldsmar?

Freshly sealed paver driveway on an Oldsmar street
Sealed paver pool deck on an Oldsmar street
Sealed paver patio behind the home on an Oldsmar street
Sealed paver walkway to a front door on an Oldsmar street
Close view of freshly sealed pavers on an Oldsmar street
Paver area with one cleaned half beside a dirty half on an Oldsmar street
Contractor cleaning pavers on an Oldsmar street
Contractor sealing or sanding pavers on an Oldsmar street
Questions

Frequently Asked Questions

What is the average cost to seal pavers in Florida?

One Tampa Bay company publishes $1.50 to $2.50 per square foot for Oldsmar to wash, re-sand and seal. A 600 square foot driveway comes to roughly $900 to $1,500. Its flat rate to wash a two car paver driveway is $199. To price your own driveway, send the short estimate form.

Is it better to spray or roll sealer on pavers?

Many jobs use both. Unilock lists a pump sprayer or a foam roller, with a dry roller to lift pooled sealer on a driveway that has slight low spots. Unilock says sprayed sealer cannot be washed off, so overspray is kept off walls and plants.

How long does wet look sealer last on pavers?

A driveway is the hardest test. Unilock puts solvent-based, high shine sealer at four to five years under normal use and says heavy traffic can mean sooner. Tires, oil and sun all push toward the short side.

How often should pavers be resealed in Florida?

Three to five years is the range Unilock and Belgard both give. Belgard adds a cap of one coat every three years and no more than two applications. For a driveway that sees daily parking, plan on the sooner end.

Will sealing keep oil from staining my Oldsmar driveway?

It helps, but it does not make a driveway oil proof. Unilock says sealing is key to keeping oil, gasoline and other fluids from soaking in. Belgard says to soak up a spill right away with granular absorbent and not rub it.

How long before I can park on a sealed driveway in Oldsmar?

About 48 hours is the figure one Tampa Bay company gives, with feet allowed after about 24. Unilock asks for full cure before driving and up to 48 hours of dry weather. For a plan that works around your cars, call (656) 254-5347.

Can a driveway with sunken pavers still be sealed?

Sealing is the last step, not the repair. Unilock says sealer cannot fix drainage or base problems, so sunken or rocking pavers are reset first. The repair is quoted apart from the sealing.

Do I need to move my sprinklers before a driveway is sealed?

Aim them away from the driveway. Unilock says to turn sprinklers off after sealing because water can leave marks and get trapped under the coat. UF/IFAS adds that iron in Florida irrigation water leaves orange streaks on what it touches.

Want the driveway to look cared for again?

Call, or use the short estimate form. A reply from a local contractor arrives inside 1 business day, often within hours.

Call (656) 254-5347

Free, no obligation